Today's injection molds use much the same process and produce a wide variety of products from car panels to outdoor furniture, small toys and tools. Injection molding is ubiquitous in manufacturing and uses many different materials from polymer plastics to aluminum, copper and other metals. The plastic bottles and kitchen implements people use in everyday life are products of the injection process.Because the metal molds are generally Aluminum fins suppliers expensive to produce, injection molding is most economically used when thousands of pieces are being manufactured. Molds are made of hardened steel or, more recently, aluminum which is less expensive.

Described very simply, molten plastic is Aluminum fins manufacturers injected into the mold under high heat and pressure. The goal is to have the molten plastic material evenly flow to all parts of the mold, creating an exact, consistent, solid plastic replica of the mold cavity. After a brief cooling cycle, the mold or tooling mechanically ejects the plastic part which then moves on through the manufacturing process. In the injection molding industry, this is a completely automated process that's very fast and extremely efficient.

Rotational molding is yet another method of producing multiple products, most often made with a variety of plastic powders. This process is usually used in making hollow products such as traffic cones, canoes, kayaks, bicycle helmets and giant tanks used for water or chemical storage.Like Injection molding, rotational molding had its roots in the 1940s. But it was not until the technology was more sophisticated and new polymer and plastic formulations became available that the rotational process became a mainstream manufacturing method.

The two processes are quite different. Let's consider, for example, a 300 gallon water storage tank made of polyethylene. Picture a master mold made of aluminum or steel. The plastics manufacturer pours poly resin powder into the mold that is fitted inside an oven. Once sealed, the mold is mechanically turned on at least three axes, moving much like a gyroscope. At the same time, the oven is raised to an appropriate temperature and the polymer - or other material - tumbles inside and slowly coats the inner walls of the mold, melting as it rotates.